LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A3 Premium, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 40 (Rear Suspension -- (A3 Sedan)) >> 42 Rear Suspension >> Wheel Bearing And Trailing Arm >> Overview - Wheel Bearing >> Overview - Wheel Bearing Housing And Wheel Bearing Unit

Overview - Wheel Bearing Housing And Wheel Bearing Unit

WARNING: This page is about a different variant/trim than selected.
Fig 1: Exploded View Of Wheel Bearing Housing And Wheel Bearing Unit
GWWA42-10667Courtesy of AUDI OF AMERICA, LLC
  1. Bolt
  2. Right Rear ABS Wheel Speed Sensor -G44- /Left Rear ABS Wheel Speed Sensor -G46-
  3. Wheel Bearing Housing
  4. Bonded Rubber Bushing
  5. Bolt
  6. Brake Rotor
  7. Bolt
  8. Dust Cap
  9. Bolt
    • :WHT.005.437  / black = 200 Nm + 180°  turn
    • :WHT.005.437.A  / silver =200 Nm + 90°  turn
    • Always replace if removed
    • Loosening and tightening. Refer to DRIVE AXLE THREADED CONNECTION, LOOSENING AND TIGHTENING 
    • Before installing, clean the threads in the wheel bearing housing with a tap.
  10. Wheel Bearing Unit
  11. Brake Shield


Fig 1: Exploded View Of Wheel Bearing Housing And Wheel Bearing Unit
GWWA42-10657Courtesy of AUDI OF AMERICA, LLC
  1. Bolt
    • 80 Nm + 90° 
    • Always replace if removed
  2. Drive Axle
  3. Wheel Bearing Housing
  4. Right Rear ABS Wheel Speed Sensor -G44- /Left Rear ABS Wheel Speed Sensor -G46-
  5. Bolt
  6. Bonded Rubber Bushing
  7. Bolt
  8. Brake Rotor
  9. Bolt
  10. Bolt
    • :WHT.005.437  / black = 200 Nm + 180°  turn
    • :WHT.005.437.A  / silver = 200 Nm + 90°  turn
    • Always replace if removed
    • Loosening and tightening. Refer to DRIVE AXLE THREADED CONNECTION, LOOSENING AND TIGHTENING 
    • Before installing, clean the threads in the CV joint with a thread tap.
  11. Wheel Bearing Unit
  12. Brake Shield
scientia non olet · About LEMON Manuals