Fuel Filler Door Unit, Removing And Installing: Removing
WARNING: This page is about a different variant/trim than selected.
-- Unclip the drain hose from the lower guide piece FUEL FILLER DOOR UNIT DRAIN HOSE, REMOVING AND INSTALLING .
-- The markings -arrows- on the fuel filler door must first be released.
-- At the top of the fuel filler door unit, pierce a small screwdriver in the direction of the -arrow- through the markings in the fuel filler door over the retainers at an angle from below.
-- Gently lift the screwdriver upward and release the retainers.
-- On the underside, pierce the screwdriver at the markings at an angle from above to below.
-- Gently push the screwdriver downward and release the retainers.
-- Remove the fuel filler door unit with the drain hose gradually from the opening.