Overview - Bevel Box
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2017 Audi S3, 2017 Audi A3 Quattro, 2016 Audi S3, 2016 Audi A3 Quattro, and 2016 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- Tightening specification -item 3- : Bolt
- Heat Shield
- For drive axle
- Bolt
- Tightening specification. Refer to OVERVIEW - DRIVE AXLE
- Bolt
- Tightening specification. Refer to DRIVESHAFT, REMOVING AND INSTALLING .
- Heat Shield
- For drive axle
- Bolt
- Tightening specification. Refer to DRIVESHAFT, REMOVING AND INSTALLING .
- Bevel Box
- Removing. Refer to BEVEL BOX, REMOVING
- Installing. Refer to BEVEL BOX, INSTALLING
- Bolt
- Tightening specification. Refer to Figure
- Always replace after removing
- Bracket
- For bevel box
- Different versions. For the correct allocation. Refer to the Parts Information.
- Bolt
- Bolt