Overview - Hood

Fig 1: Exploded View Of Hood

Courtesy of AUDI OF AMERICA, LLC

Hood
- Removed pedestrian protection: reset the hinge. Refer to HINGE, RESETTING
- Removing and Installing. Refer to HOOD, REMOVING AND INSTALLING .
Hook
- Removing and Installing. Refer to HOOK, REMOVING AND INSTALLING .
Cap Nut
- 8 Nm
Cap Nut
- 8 Nm
Striker
- Removing and Installing. Refer to STRIKER, REMOVING AND INSTALLING .
Bolts
- 11 Nm
Catch Bracket
- Removing and Installing. Refer to RELEASE CABLE, REMOVING AND INSTALLING .
Ball Pin
Gas-Filled Strut
- Removing and Installing. Refer to GAS-FILLED STRUT, REMOVING AND INSTALLING .
- Install with tube end of strut at body.
Pedestrian Protection Trigger 1 -G598-
- Removing and Installing. Refer to HINGES, REMOVING AND INSTALLING, WITH PEDESTRIAN PROTECTION .
Nut
- 8 Nm
Hinge (Active)
- Removing and Installing. Refer to HINGES, REMOVING AND INSTALLING .
Nut
- 25 Nm
Hinge (Passive)
- Removing and Installing. Refer to HINGES, REMOVING AND INSTALLING .