Tail Pipes, Replacing

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2017 Audi S5, 2016 Audi S5, 2016 Audi S4, 2015 Audi S5, and 2015 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Chain Pipe Cutter VAS6254

Procedure

Fig 1: End Pipe, Replacing

Courtesy of AUDI OF AMERICA, LLC

Tightening specifications. Refer to OVERVIEW - MUFFLER .

-- Separate the tailpipe -1- at the separating point -C- using Chain Pipe Cutter VAS6254.

-- Mount the tail pipe -3- up to the marking -A-. Align the slot in the tail pipe with the marking -B-.

-- Tighten clamping sleeve nut -2-.