Bumper Guide Pieces, Removing And Installing: Installing
- Tightening specification. Refer to OVERVIEW - BUMPER COVER .
Install in reverse order of removal. Note the following:
-- Install the rear bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .
Retainer
Removing
-- Remove the rear bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .
-- Remove the bumper cover side mount. Refer to BUMPER GUIDE PIECES, REMOVING AND INSTALLING => Side Mount .
-- Remove the bolts -arrows- and the bumper cover locking mechanism -1- .
Installing
- Tightening specification. Refer to OVERVIEW - BUMPER COVER .
Install in reverse order of removal. Note the following:
-- Install the bumper cover side mount. Refer to BUMPER GUIDE PIECES, REMOVING AND INSTALLING => Side Mount .
-- Install the rear bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .
Center Guide
Removing
-- Remove the rear bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING, AUDI RS5 .
-- Remove the nuts -arrows- .
-- Remove the center guide -3- .
Installing
- Tightening specification. Refer to OVERVIEW - BUMPER COVER, AUDI RS5 .
Install in reverse order of removal. Note the following:
-- Close the rear lid.
-- Position the center guide and slide it upward until the assembly aids -1 and 4- lies on the rear lid -2- .
-- Tighten the nuts and remove the assembly aids.
-- Install the rear bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING, AUDI RS5 .