LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 57 (Bumpers (Coupe)) >> 63 Bumpers >> Front Bumper >> Impact Absorber Mount, Removing And Installing >> Impact Member Mount, Removing And Installing, Vehicles From My 2012 >> Installing

Impact Member Mount, Removing And Installing, Vehicles From My 2012: Installing

WARNING: This page is about a different variant/trim than selected.

Install in reverse order of removal. Note the following:

-- Tighten the impact member mount according to the marking made during removal.

-- Install the headlamp housing mount. Refer to Headlamps .

-- Install the impact member. Refer to IMPACT MEMBER, REMOVING AND INSTALLING, VEHICLES FROM MY 2012 .

-- Install the front bumper cover. Audi A5. Refer to BUMPER COVER, REMOVING AND INSTALLING, EXCEPT AUDI RS5 , Audi RS 5. Refer to BUMPER COVER, REMOVING AND INSTALLING, AUDI RS5 .

scientia non olet · About LEMON Manuals