Overview - Seat Pan Cover And Cushion, Seat Pan Without Seat Depth Adjuster
WARNING: This page is about a different variant/trim than selected.
NOTE:
The Assembly Overview Is Based On A Manual Or Power Standard Front Seat And Comfort Seat.
- Cover
- Contour Wire
- Pushed Into The Cover
- Clipped In -3- (Only With Fabric Covers)
- Clip
- Covered In Foam Padding (Only With Fabric Covers)
- Retaining Channel
- Clipped In The Clip -5-
- Sewn Into Cover
- Clip
- Covered In Foam Padding
- Retaining Channel
- Sewn Into Cover
- For Engaging The Cover On The Rear Of The Seat Pan Upper Frame
- LATCH Child Seat Anchorage
- Vehicles Equipped With: Front Passenger Seat Only
- Overview. Refer To OVERVIEW - FRONT CHILD SEAT ANCHORS .
- Cover Strap
- With Clamping Profile Or Hook
- Retaining Channel Or Hook Sewn To The Cover
- For Engaging The Cover On Side Of The Seat Pan Upper Frame
- Retaining Bracket
- For Sill Side Trim
Manual Standard Front Seat
- Removing And Installing. Refer To SILL SIDE TRIM RETAINING BRACKET, REMOVING AND INSTALLING, MANUAL STANDARD SEAT, SPORT SEAT, SUPER SPORT SEAT
(Retaining Bracket Not Shown In The Illustration)
Power Standard Front Seat
- Removing And Installing. Refer To SILL SIDE TRIM RETAINING BRACKET, REMOVING AND INSTALLING, POWER STANDARD SEAT .
- For Sill Side Trim
- Cushion
- With Wire Placed In Foam Upholstery (Only With Leather Covers)
- Cushion Clip
- Only With Leather Covers
- For Securing The Cover To The Padding
- Always Replace If Removed
- Install In Same Location As Before Removal
- Retaining Channel
- Sewn Into Cover
- For Engaging The Cover On The Front And Side Of The Seat Pan Upper Frame.
- Cover
- With Padding
- Removing And Installing. Refer To SEAT PAN COVER AND CUSHION, REMOVING AND INSTALLING, SEAT PAN WITHOUT SEAT DEPTH ADJUSTER .
- Cover, Separating From Padding And Connecting. Refer To SEAT PAN COVER AND CUSHION, SEPARATING, SEAT PAN WITHOUT SEAT DEPTH ADJUSTER .