BELT PULLEY, REMOVING AND INSTALLING, "Denso" A/C COMPRESSOR, VERSION "2": Notes
WARNING: This page is about a different variant/trim than selected.
A/C COMPRESSOR WITHOUT A/C CLUTCH -N25-
NOTE:
Observe Notes On Replacing Belt Pulley. Refer To OVERVIEW - BELT PULLEY, "DENSO" A/C COMPRESSOR, VERSION "2" .
Perform Preparatory Work As For Removing Belt Pulley. Refer To PRELIMINARY WORK FOR REPLACING BELT PULLEY .
The Belt Pulley Is Made Of Plastic And Is Sensitive To Impact, Therefore Take Special Care When Handling It.
If Overload Safeguard Of Drive Plate -C- Has Triggered, Drive Plate Can Be Pried Off From Belt Pulley -D- After Removing Circlip -A-
To Optimize Noise Reduction, A Circlip -A- With A Rubber Disc Vulcanized On It Is Installed. Refer To OVERVIEW - BELT PULLEY, "DENSO" A/C COMPRESSOR, VERSION "2" .