LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 29 (Air Conditioning (A/C Compressor) (Coupe)) >> 87 Air Conditioning >> A/C Compressor >> Preliminary Work For Replacing Belt Pulley

Preliminary Work For Replacing Belt Pulley

WARNING: This page is about a different variant/trim than selected.

-- Turn Off The Ignition.

-- Remove The Front Noise Insulation. Refer To NOISE INSULATION .

-- Mark The Running Direction Of The Ribbed Belt (Always Refer To The Service Information For The Routing Of The Ribbed Belt For Each Engine). Refer To RIBBED BELT, REMOVING AND INSTALLING .

-- Release the tension on the ribbed belt and then remove it. Refer to RIBBED BELT, REMOVING AND INSTALLING .

NOTE:

Mark Direction Of Rotation Of Ribbed Belt Using Chalk Or Felt-Tip Marker Before Removing. Running A Used Belt In The Opposite Direction Could Destroy It.

scientia non olet · About LEMON Manuals