Overview - Battery, Coupe

WARNING: This page is about a different variant/trim than selected.

Fig 1: Exploded View Of Battery, COUPE

Courtesy of AUDI OF AMERICA, LLC

Battery
- In The Luggage Compartment In The Spare Wheel Well
- Removing And Installing. Refer To BATTERY, REMOVING AND INSTALLING .
Screw
Nut
- 6 Nm
Fuse Panel A -SA-
- Disconnecting and Connecting. Refer To BATTERY, REMOVING AND INSTALLING .
- Removing and installing. Refer To FUSE PANEL A -SA- IN LUGGAGE COMPARTMENT, REMOVING AND INSTALLING .
Positive Terminal Cover
Retaining Bracket
- For The Vehicle Tool Kit Cover
Screw
- 18 Nm
Mount
- For The Tool Kit
Cover
- For The Tool Kit
Nut
- For The Vehicle Tool Kit Cover
- Tightening Specification. Refer To OVERVIEW - LUGGAGE COMPARTMENT FLOOR .
Screw
- 18 Nm
Negative Terminal Cover
Nut
- 6 Nm
Ground Cable with Battery Monitoring Control Module -J367-
- Disconnecting and Connecting. Refer To BATTERY, DISCONNECTING AND CONNECTING .
- Removing and installing. Refer To GROUND CABLE WITH BATTERY MONITORING CONTROL MODULE -J367-, REMOVING AND INSTALLING .
Screw
Nut
- 20 Nm
Central Venting System Hose
Screw
- 18 Nm
Bracket