Input Shaft, Output Shaft, Reverse Drive Gear And Shift Rails/Shift Forks Assembly Overview: Notes

WARNING: This page is about a different variant/trim than selected.

Fig 1: Identifying Input Shaft, Output Shaft, Reverse Drive Gear And Shift Rails/Shift Forks Assembly

Courtesy of AUDI OF AMERICA, LLC

Transmission Housing
- With differential and pinion
Oil Collector Tray
- Clipped into the bearing bracket and the gearshift rail/shift fork for 3rd and 4th gears
Input and Output Shafts with Shift Fork Group
- Disassembling and assembling, refer to SHIFT FORK GROUP, INPUT SHAFT, 1ST, 2ND AND REVERSE GEAR OUTPUT SHAFTS ASSEMBLY OVERVIEW
Reverse Drive Gear
- With support/reverse shaft
- Reverse drive gear assembly overview REVERSE DRIVE GEAR ASSEMBLY OVERVIEW
Magnet
- Clean