Part II
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi A6 Quattro, 2017 Audi A6, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Part I. Refer to PART I .
- Support
- Turbocharger
- Removing and installing. Refer to TURBOCHARGER, REMOVING AND INSTALLING .
- O-ring
- Always replace after removing.
- Coat with engine oil
- Line
- For the crankcase ventilation
- Bolt
- 9 Nm
- Depending on the version a bolt or a threaded connection with a connected hose is installed.
- Heated Oxygen Sensor -G39-
- Removing and installing. Refer to HEATED OXYGEN SENSOR, REMOVING AND INSTALLING .
- O-ring
- Always replace after removing.
- Coat with engine oil
- Oil Supply Line
- Bolt
- 9 Nm
- O-ring
- Always replace after removing.
- Coat with engine oil
- Bolt
- 9 Nm
- Bolt
- 30 Nm
- Coat the with hot bolt paste.
- Heat Shield
- Bolt
- 9 Nm
- Coolant Supply Line
- O-ring
- Always replace after removing.
- Coat with engine oil
- Bolt
- 9 Nm
- O-ring
- Always replace after removing.
- Coat with coolant
- Bolt
- 20 Nm + 90°
- Always replace after removing.