Part I
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi A6 Quattro, 2017 Audi A6, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Part II. Refer to PART II .
- Bolt
- 25 Nm
- Oil Return Line
- O-ring
- Always replace after removing.
- Coat with engine oil
- O-ring
- Always replace after removing.
- Coat with engine oil
- Turbocharger
- Removing and installing. Refer to TURBOCHARGER, REMOVING AND INSTALLING .
- Nut
- 25 Nm
- Always replace after removing.
- Coat the stud bolts with hot bolt paste.
- Seal
- Always replace after removing.
- Bracket
- Coolant Return Line
- Bolt
- 9 Nm
- O-ring
- Always replace after removing.
- Coat with coolant
- Turbocharger Recirculation Valve -N249-
- Installation position. Refer to .
- Bolt
- 9 Nm
- O-ring
- Always replace after removing.
- O-ring
- Always replace after removing.
- Bolt
- 9 Nm
- Connection
- Bolt
- 9 Nm
-- Note the installation location -arrows-.