Overview - Engine Coolant Temperature Sensor

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi A6 Quattro, 2017 Audi A6, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Engine Coolant Temperature Sensor With Components

Courtesy of AUDI OF AMERICA, LLC

O-ring
- Always replace after removing.
- Coat with coolant
Engine Coolant Temperature Sensor on Radiator Outlet -G83-
- Removing and installing. Refer to Engine Coolant Temperature Sensor on Radiator Outlet -G83-, REMOVING AND INSTALLING .
Clip
- Check for secure fit
O-ring
Refer to -item 5-
O-ring
- Installation Instructions. Refer to OVERVIEW - ENGINE COOLANT TEMPERATURE SENSOR .
Bolt
- Tightening Specifications. Refer to OVERVIEW - ENGINE COOLANT TEMPERATURE SENSOR .
ENGINE COOLANT TEMPERATURE SENSOR -G62-
- On transmission side of the cylinder head
- Removing and Installing. Refer to ENGINE COOLANT TEMPERATURE SENSOR -G62-, REMOVING AND INSTALLING .