Overview - Engine Coolant Temperature Sensor
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi A6 Quattro, 2017 Audi A6, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Clip
- Check for secure fit
- O-ring
- Always replace after removing.
- Coat with coolant
- O-ring
- Always replace after removing.
- Coat with coolant
- O-ring
- Always replace after removing.
- Coat with coolant
- Engine Coolant Temperature Sensor -G62-
- On transmission side of the cylinder head
- Removing and installing. Refer to Engine Coolant Temperature Sensor -G62-, REMOVING AND INSTALLING .
- Bolt
- 4 Nm + 45°
- Always replace after removing.
- Engine Coolant Temperature Sensor on Radiator Outlet -G83-
- Depending on the model there are different component locations
- Removing and Installing. Refer to ENGINE COOLANT TEMPERATURE SENSOR ON RADIATOR OUTLET -G83-, REMOVING AND INSTALLING .