LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 962 (Exterior System (Bumpers - Service Information)) >> 63 Bumpers >> Front Bumper >> Bumper Cover, Removing And Installing >> Front Bumper Cover, Adjusting >> Length Adjustment:

Length Adjustment:

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
GWWA63-10525Courtesy of AUDI OF AMERICA, LLC

-- Loosen the bolt -3-.

-- Adjust the front bumper cover in the longitudinal direction.

-- Tighten the bolt -3- to the tightening specification, refer to -item  11- Bolt.

-- Check the gap dimension. Refer to FRONT BUMPER COVER GAP DIMENSIONS , and repeat the adjustment if necessary.

scientia non olet · About LEMON Manuals