Overview - Front Seat, Multi-Contour Seat
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The overview is based on the driver seat. The passenger seat is similar and the components are installed reversed from left to right.
- Connector Station
- Connector assignment. Refer to the Appropriate Wiring Diagrams.
- Removing and installing. Refer to AIRBAG ADAPTER, CONNECTING AND DISCONNECTING .
- Connector
- With a corrugated tube for the modular wiring routing
- Modular wiring with corrugated tube on front seat. Refer to FRONT SEAT WIRE ROUTING .
- Front Trim
- Removing and installing. Refer to SEAT SIDE TRIM ON SILL PANEL SIDE/FRONT SEAT TRIM, REMOVING AND INSTALLING, MULTI-CONTOUR SEAT .
- Seat Depth Adjuster
- Overview. Refer to OVERVIEW - SEAT PAN, SEAT DEPTH ADJUSTER .
- Front Cover
- For the seat rail
- Quantity: 2
- Removing and installing. Refer to SEAT RAIL COVER, REMOVING AND INSTALLING .
- Push onto the seat rail until it audibly latches
- Front Spindle Cover
- Quantity: 2
- Removing and installing. Refer to FRONT SEAT, REMOVING AND INSTALLING .
- Push onto the seat rail until it audibly latches
- Bolt
- Quantity: 4
- 50 Nm
- Child Seat Anchor
- Equipment levels
- for the front passenger seat only
- Overview. Refer to OVERVIEW - FRONT LATCH CHILD SEAT ANCHORS .
- For checking after an accident. Refer to CHILD SEAT ANCHORS, CHECKING AFTER COLLISION .
- Seat Belt Latch
- Removing and installing. Refer to FRONT SEAT BELT LATCH, REMOVING AND INSTALLING, MULTI-CONTOUR SEAT .
- Tunnel-Side Trim
- Removing and installing. Refer to SEAT SIDE TRIM ON THE TUNNEL SIDE, REMOVING AND INSTALLING .
- Multi-contour Seat
Vehicles with:
- Seat and backrest heating
- Seat Ventilation
- Footwell lamp
- Rear seat entertainment
- Removing and installing. Refer to FRONT SEAT, REMOVING AND INSTALLING .
- Driver/Front Passenger Seat Forward/Back Adjustment Motor -V28- / -V31- or faulty Memory Seat/Steering Column Adjustment Control Module -J136- /Front Passenger Memory Seat Control Module -J521-. Refer to FRONT SEAT WITH FAULTY SEAT FORWARD/BACK ADJUSTMENT MOTOR OR FAULTY CONTROL MODULE, REMOVING .
- Headrest
- Equipment levels
- Removing and installing. Refer to HEADREST, REMOVING AND INSTALLING .
- Backrest Cover
- Removing and installing. Refer to BACKREST COVER, REMOVING AND INSTALLING, MULTI-CONTOUR SEAT .
- Driver Side Massage Function Button -E670-
- Front passenger side: Front Passenger Massage Function Button -E671-
- Removing and installing. Refer to Driver Side Massage Function Button -E670- /Front Passenger Massage Function Button -E671-, REMOVING AND INSTALLING .
- Sill-Side Trim
- Removing and installing. Refer to SEAT SIDE TRIM ON SILL PANEL SIDE/FRONT SEAT TRIM, REMOVING AND INSTALLING, MULTI-CONTOUR SEAT .
- Spindle Rear Cover
- Quantity: 2
- Removing and installing. Refer to FRONT SEAT, REMOVING AND INSTALLING .
- Push onto the seat rail bolt until it audibly latches
- Rear Cover
- For the seat rail
- Quantity: 2
- Removing and installing. Refer to SEAT RAIL COVER, REMOVING AND INSTALLING .
- Push onto the seat rail until it audibly latches
- Driver Seat Switch Module -E663-
- Front passenger side: Front Passenger Seat Switch Module -E664-
- Overview. Refer to OVERVIEW - SEAT PAN, SEAT ADJUSTMENT ACTUATOR/SWITCH .
- Driver Seat Switch Module 2 -E667-
- Front passenger side: Front Passenger Seat Switch Module 2 -E668-
- Overview. Refer to OVERVIEW - SEAT PAN, SEAT ADJUSTMENT ACTUATOR/SWITCH .
- Cover
- For the connector station
- Removing and installing. Refer to AIRBAG ADAPTER, CONNECTING AND DISCONNECTING .