Plenum Chamber Bulkhead, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Tightening Specification. Refer to OVERVIEW - BULKHEAD .
Install in reverse order of removal and Note The Following:
-- Make sure the seal -2- on the plenum chamber bulkhead -1- fits correctly into the mount -3- on the plenum chamber.
-- Check the coolant level. Refer to COOLANT LEVEL, CHECKING [FOR ENGINE(S) CYNB] , CHECK THE COOLANT LEVEL [For engine(s) CTGE, CEUC] , CHECK THE COOLANT LEVEL [FOR ENGINE(S) CPNB] and CHECK THE COOLANT LEVEL [FOR ENGINE(S) CREC, CREH] .