Overview - Bulkhead
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Seal
- Install on the plenum chamber bulkhead
- Lock Washer
- Quantity: 2
- Nut
- 4 Nm
- Plenum Chamber Bulkhead
- There are different versions.
- Removing and Installing. Refer to PLENUM CHAMBER BULKHEAD, REMOVING AND INSTALLING .
- Terminal 30 Wire Junction -TV2-
- Removing and Installing. Refer to TERMINAL 30 WIRE JUNCTION -TV2-, REMOVING AND INSTALLING .
- Nut
- Tightening Specification. Refer to COMPONENT LOCATION OVERVIEW - RELAY PANELS, FUSE PANELS AND E-BOXES .
- Cable bracket
- There are different versions.
- Bolt
- 2 Nm
- There are different versions.
- Heat Shield
- Overview. Refer to OVERVIEW - HEAT SHIELD .