LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 924 (Suspension System (Front - Service Information)) >> Front Suspension >> Suspension Strut And Upper Control Arm >> Suspension Strut, Removing And Installing >> Suspension Strut, Removing And Installing, Air Spring Damper >> Installing

Suspension Strut, Removing And Installing, Air Spring Damper: Installing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following: 

NOTE:

During assembly work, make sure no pressure points form on the suspension strut boot.

-- First secure the air spring damper on the body.

-- Tighten the new nuts -arrows- diagonally.

GWWA40-10552Courtesy of AUDI OF AMERICA, LLC

-- Install the wheel. Refer to WHEELS AND TIRES .

-- Air suspension system, filling. Refer to SYSTEM, VENTING OR FILLING .

-- Re-adapt control position CONTROL POSITION, PROGRAMMING

scientia non olet · About LEMON Manuals