System, Venting Or Filling
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
The Bleeding/Filling Of The Air Suspension System Is Performed Using The Vehicle Diagnostic Tester.
VASPC
Connect Vehicle Diagnostic Tester.
-- Select Guided Functions mode.
-- Select the "34 - Level Control System Control Module" address.
-- Select "J197 - venting or filling the system" and follow the instructions on the screen.
ODIS - Offboard Diagnostic Information System
Connect Vehicle Diagnostic Tester.
-- Select Diagnostic operating mode and start diagnostics.
-- Select the Control Module tab.
-- Select the "34 - Level Control System Control Module" address.
-- Select "J197 - venting or filling the system" and follow the instructions on the screen.