LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 917 (Exterior Trim System (Service Information)) >> Exterior Equipment >> Trailer Hitch >> Cable Mount Bracket, Removing And Installing >> Installing

Cable Mount Bracket, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

-- The lobes -1- on the bracket must engage in the opening on the body.

-- Install the cable mount. Refer to CABLE MOUNT, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals