Coolant Fan Control (FC) Control Module J293 , removing and installing

WARNING: This page is about a different car, the 2008 Audi RS 4 and 2007 Audi RS 4. However, it is still accessible from the selected car via links, so may be relevant.

Removing

Remove front bumper cover →
- 63 BUMPER
- 63 - BUMPERS for BODY EXTERIOR - CABRIOLET
.

Fig 1: Disconnecting Electrical Harness Connectors, Removing Nuts & Coolant Fan Control (FC) Control Module J293

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Disconnect electrical harness connectors - 1 to 3 -.
Remove nuts - arrows -.
Remove Coolant Fan Control (FC) Control Module J293.

Installing

Installation is in reverse order of removal, note the following:

Install front bumper cover →
- 63 BUMPER
- 63 - BUMPERS for BODY EXTERIOR - CABRIOLET
.

Torque specifications

Component	Nm
Coolant Fan Control (FC) Control Module J293 to bracket	9