Secondary Air Injection Pump Motor -V101-, REMOVING AND INSTALLING: Installing

WARNING: This page is about a different car, the 2012 Audi Q5 and 2011 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

Tightening specification, refer to OVERVIEW - SECONDARY AIR INJECTION SYSTEM .

Install in reverse order of removal. Note the following:

NOTE:

Replace the O-rings.

-- Install the bumper cover noise insulation, refer to Front Bumper .

-- Install the noise insulation, refer to OVERVIEW - NOISE INSULATION .