Right Combination Valve, Removing And Installing: Installing
- Tightening specification, refer to OVERVIEW - SECONDARY AIR INJECTION SYSTEM and Figure.
Install in reverse order of removal. Note the following:
Replace the seal.
The hose connections as well as the air guide pipes and hoses must be free of oil and grease before installing.
Secure all hose connections with hose clamps of the same type as those equipped by the factory .
In order to be able to securely mount the air guide hoses on their connectors, spray the screws on the previously used clamps with a rust remover.
-- Install the right catalytic converter, refer to RIGHT CATALYTIC CONVERTER, REMOVING AND INSTALLING, DSG TRANSMISSION 0B5 .
-- Install the tower brace, refer to TOWER BRACE, REMOVING AND INSTALLING .
- Tightening specification, refer to OVERVIEW - SECONDARY AIR INJECTION SYSTEM and Figure.
Install in reverse order of removal. Note the following:
Replace the seal.
The hose connections as well as the air guide pipes and hoses must be free of oil and grease before installing.
Secure all hose connections with hose clamps of the same type as those equipped by the factory .
In order to be able to securely mount the air guide hoses on their connectors, spray the screws on the previously used clamps with a rust remover.
-- Install the right catalytic converter, refer to RIGHT CATALYTIC CONVERTER, REMOVING AND INSTALLING, WITH AUTOMATIC TRANSMISSION 0B6 .
-- Install the tower brace, refer to TOWER BRACE, REMOVING AND INSTALLING .