Left Flange Shaft, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Locating Left Flange Shaft Mounting Bracket Bolts

Courtesy of AUDI OF AMERICA, LLC

Secure the transmission to the Engine And Transmission Holder VAS6095, refer to SECURING ON ENGINE AND TRANSMISSION HOLDER .

-- Tilt the transmission back on the engine/transmission holder so the transmission fluid does not drain out.

-- Remove the bolts -arrows- from the flange shaft mounting bracket.

-- Remove the left flange shaft -1- from the transmission -arrow A-.

Fig 2: Removing/Installing Left Flange Shaft

Courtesy of AUDI OF AMERICA, LLC

NOTE:

Ignore -arrow B-.

-- Remove the torque converter, refer to TORQUE CONVERTER, REMOVING AND INSTALLING .