Securing On Engine And Transmission Holder

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Holding Plate VW309

Fig 1: Holding Plate VW 309
Courtesy of AUDI OF AMERICA, LLC
Hook And Support Tool 3311 with Bolt 3311/1

Fig 2: Hook And Support Tool 3311 With Bolt 3311/1
Courtesy of AUDI OF AMERICA, LLC
Engine And Transmission Holder VAS6095

Fig 3: Engine And Transmission Holder VAS 6095
Courtesy of AUDI OF AMERICA, LLC

Procedure

Fig 4: Identifying Support Tool 3311, Bolt 3311/1 And Holding Plate VW 309

Courtesy of AUDI OF AMERICA, LLC

Hold the transmission with the Shop Crane VAS6100, refer to TRANSMISSION, TRANSPORTING .

-- Attach the Holding Plate VW309A to the Hook And Support Tool 3311.

-- Place the transmission using the Shop Crane VAS6100 in the Engine And Transmission Holder VAS6095.

NOTE:

The vents for the transmission housing and final drive must be closed before turning a filled transmission with ATF pan upward on the engine/transmission holder.