Center Differential And Center Differential Housing Overview
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 Audi S5, 2012 Audi S5, 2011 Audi S5, 2010 Audi S5, and 2009 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
The center differential housing can also be removed and installed with the transmission installed. Refer to CENTER DIFFERENTIAL HOUSING AND CENTER DIFFERENTIAL WITH TRANSMISSION INSTALLED .
- Servicing, refer to DESCRIPTION AND OPERATION
- Bolt
- 24 Nm
- Steel bolts
- Quantity: 2
- Center Differential Housing
- With or without vibration dampener, depending on version
- Removing and installing with transmission installed, refer to CENTER DIFFERENTIAL HOUSING AND CENTER DIFFERENTIAL WITH TRANSMISSION INSTALLED
- Refer to REAR FLANGE SHAFT SEAL ON THE TRANSMISSION
- Refer to TRANSMISSION OUTPUT SHAFT SEAL, VEHICLES WITHOUT VIBRATION DAMPER ON THE TRANSMISSION OUTPUT SHAFT
- Refer to TRANSMISSION OUTPUT SHAFT SEAL WITH SPLINES, REMOVING - VEHICLES WITH VIBRATION DAMPER ON THE TRANSMISSION OUTPUT SHAFT
- Servicing, refer to DESCRIPTION AND OPERATION
- Bolt
- Always replace
- 10 Nm plus an additional 90° turn
- Aluminum bolts
- Pressure Spring
- Plate Spring
- Installed position: The camber on the inner diameter faces toward the flange shaft
- Adjusting Shim
- Center Differential
- Servicing only by the manufacturer
- Replace the bearing for the center differential. Refer to REMOVAL AND INSTALLATION / SPUR GEAR AND CENTER DIFFERENTIAL BEARING
- Removing and installing with transmission installed, refer to CENTER DIFFERENTIAL HOUSING AND CENTER DIFFERENTIAL WITH TRANSMISSION INSTALLED
- Spacer Sleeve
- Gear Carrier
- Pay attention to the installed position to the transmission cover INSTALLING THE CENTER DIFFERENTIAL AND HOUSING
- Drive Wheel/Spur Pinion
- Transmission Cover/Transmission