LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 667 (3.0L - Lubrication - Engine Code(S): CPNB) >> 17 Lubrication >> Engine Oil Cooler >> Engine Oil Cooler, Removing And Installing >> Installing

Engine Oil Cooler, Removing And Installing: Installing

WARNING: This page is about a different car, the 2016 Audi Q5, 2015 Audi Q5, and 2014 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE:

Replace the seal.

Secure all hose connections with hose clamps of the same type as those equipped by the factory .

-- Install the exhaust gas recirculation cooler, refer to EGR COOLER, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals