Overview - Engine Oil Cooler

WARNING: This page is about a different car, the 2016 Audi Q5, 2015 Audi Q5, and 2014 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

Engine Oil Cooler, Coolant Shut-Off Valve

Fig 1: Identifying Engine Oil Cooler, Coolant Shut-Off Valve

Courtesy of AUDI OF AMERICA, LLC

Seals
- For the mounting plate
Mounting Plate
- For the engine oil cooler
Bolt
- 9 Nm
Seal
- For the engine oil cooler
- Replace
Bolt
- 9 Nm
Engine Oil Cooler
- See note, refer to OIL PAN/OIL PUMP .
- Removing and installing, refer to ENGINE OIL COOLER, REMOVING AND INSTALLING .
Coolant Shut-Off Valve
- Removing and installing, refer to COOLANT SHUT-OFF VALVE, REMOVING AND INSTALLING .
Bolt
- Tightening specification: 9 Nm.
Seal
- For the shut-off valve
- Replace

Engine Oil Cooler Thermostat

Fig 2: Identifying Engine Oil Cooler Thermostat Components

Courtesy of AUDI OF AMERICA, LLC

Cover
- For the temperature regulator for the engine oil cooler
- Removing and installing, refer to SEALING FLANGE, BELT PULLEY SIDE, REMOVING AND INSTALLING .
Bolt
- Replace
- Tightening specification and sequence, refer to Fig 3.
O-Ring
- Replace
Engine Oil Cooler Thermostat
- Removing and installing, refer to ENGINE OIL COOLER THERMOSTAT, REMOVING AND INSTALLING .
Sealing Flange
- Belt pulley side
- Removing and installing, refer to SEALING FLANGE, BELT PULLEY SIDE, REMOVING AND INSTALLING .

Fig 3: Ribbed Belt Pulley Side Sealing Flange - Tightening Specifications and Sequence

Courtesy of AUDI OF AMERICA, LLC