Accelerator Pedal Position Sensors -G79- / -G185-, Removing And Installing: Removing
WARNING: This page is about a different car, the 2016 Audi Q5, 2015 Audi Q5, and 2014 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the lower instrument panel cover on the driver side, refer to OVERVIEW - DRIVER SIDE INSTRUMENT PANEL COVER .
-- Disconnect the connector -2- by pressing the release -1- up -arrow-.
-- Remove the bolt -3- and remove the accelerator pedal module downward.