Overview - Driver Side Instrument Panel Cover
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- 3 Nm
- Side Cover
- For the instrument panel
- Removing and installing. Refer to INSTRUMENT PANEL SIDE COVER, REMOVING AND INSTALLING .
- Bracket
- Insert in the footrest
- 16-Pin Connector -T16-
- Data Link Connector (DLC)
- Headlamp Range Control Adjuster -E102-
- Equipment levels
- Removing and Installing. Refer to Controls .
- Bracket
- Install on the A/C unit
- Bolt
- 3 Nm
- Spring Clip
- For the driver side instrument panel cover
- Quantity: 3
- Press into the instrument panel
- Bolt
- 3 Nm
- Trim
- For the Headlamp Range Control Adjuster -E102-
- Equipment levels
- Removing and installing. Refer to Headlamp Range Control Adjuster -E102- TRIM, REMOVING AND INSTALLING .
- Light Switch -E1-
- Removing and Installing. Refer to Controls .
- Driver Side Instrument Panel Cover
- There are different versions.
- Removing and installing. Refer to DRIVER SIDE INSTRUMENT PANEL COVER, REMOVING AND INSTALLING .
- Equipment level with Headlamp Range Control Adjuster -E102- : After replacing the driver side instrument panel cover add the cut-out for the headlamp range control adjuster. Refer to Headlamp Range Control Adjuster -E102-, MAKING AN ADDITIONAL CUT-OUT IN INSTRUMENT PANEL COVER .
- Bolt
- 3 Nm