Brake Pedal Position Sensor -G100-, REMOVING AND INSTALLING: Installing
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
- Tightening specifications, refer to OVERVIEW - BRAKE PEDAL .
-- Insert the Brake Pedal Position Sensor -G100- -2- and tighten the bolts -arrows- to 8 Nm.
-- Connect the connector -1-.
-- Install footwell vent, refer to DRIVER SIDE FOOTWELL VENT, REMOVING AND INSTALLING .