LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 658 (Brake System - Mechanical Components) >> 46 Mechanical Components >> Brake Pedal >> Brake Booster Plunger Mount, Removing And Installing >> Removing

Brake Booster Plunger Mount, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

-- Refer to BRAKE PEDAL, REMOVING FROM BRAKE BOOSTER .

NOTE:

If possible, leave the brake pedal stop -17- installed; it could break the mount for the brake lamp switch -10- if the brake pedal is released too quickly.

-- Pry the brake booster plunger mount -15- out of the brake pedal using a suitable tool.

scientia non olet · About LEMON Manuals