Reducing Agent Metering System Control Module -J880-, REMOVING AND INSTALLING: Installing
WARNING: This page is about a different car, the 2016 Audi Q5, 2015 Audi Q5, and 2014 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
- Tightening specification, refer to OVERVIEW - REDUCING AGENT METERING SYSTEM CONTROL MODULE .
-- Install the left rear aerodynamic trim panel, refer to OVERVIEW - UNDERBODY PANELS .
-- Connect the batter while doing so follow all steps after connecting the battery, refer to BATTERY, DISCONNECTING AND CONNECTING .