Overview - Reducing Agent Metering System Control Module
WARNING: This page is about a different car, the 2016 Audi Q5, 2015 Audi Q5, and 2014 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Component location: the Reducing Agent Metering System Control Module -J880- is located on the underbody on the left at the level of the B-pillar.
- Connector
- Reducing Agent Metering System Control Module -J880-
- Checking in Guided Functions Vehicle Diagnostic Tester
- Removing and installing, refer to Reducing Agent Metering System Control Module -J880-, REMOVING AND INSTALLING .
- Bracket
- For Reducing Agent Metering System Control Module -J880-
- Nut
- Tightening specification: 5 Nm
- Connector