Fuel Pump Control Module -J538-, REMOVING AND INSTALLING: Installing
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
- Tightening specification, refer to OVERVIEW - FUEL DELIVERY UNIT/FUEL LEVEL SENSOR .
-- Install the sealing flange cover, refer to Figure.
-- Install 1/3 of the rear seat, refer to INSTALLING .
-- Connect the battery while doing so follow all steps after connecting the battery, refer to battery - CONNECTING .