Rear Seat, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi Q5, 2016 Audi Q5, 2015 Audi Q5, 2014 Audi Q5, and 2013 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

Left 2/3 Rear Seat:

Fig 1: Identifying Left 2/3 Rear Seat

Courtesy of AUDI OF AMERICA, LLC

-- Tighten the bolts in the following sequence -1, 2, 3 and 4-.

Right 1/3 Rear Seat:

Fig 2: Identifying Right 1/3 Rear Seat

Courtesy of AUDI OF AMERICA, LLC

-- Tighten the bolts in the following sequence -1, 2, 3 and 4-.

Continued for both sides:

-- Attach the cable and clip the coupling station to the seat frame.