LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 644 (3.0L - Diesel Fuel Injection - Engine Code(S): CPNB (As Of 07.2014)) >> 23 Diesel Fuel Injection >> Intake Manifold >> Intake Flap Motor -V157-, REMOVING AND INSTALLING >> Installing

Intake Flap Motor -V157-, REMOVING AND INSTALLING: Installing

WARNING: This page is about a different car, the 2016 Audi Q5, 2015 Audi Q5, and 2014 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE:

Replace the seals

The hose connections as well as the air guide pipes and hoses must be free of oil and grease before installing.

-- Install oil dipstick guide tube, refer to OVERVIEW - OIL PAN/OIL PUMP, OIL PAN UPPER SECTION .

-- Install the EGR pipe, refer to OVERVIEW - EXHAUST GAS RECIRCULATION .