Fan Shroud, Removing And Installing: Installing
WARNING: This page is about a different car, the 2016 Audi Q5, 2015 Audi Q5, and 2014 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
Tightening specifications:
- Refer to OVERVIEW - RADIATOR/COOLANT FAN .
- Refer to Fig 1.
NOTE:
Secure all hose connections with hose clamps of the same type as those equipped by the factory .
-- Tighten the ATF lines, refer to OVERVIEW - ATF CIRCUIT for 0BK .
-- Install the air guide, refer to OVERVIEW - AIR FILTER HOUSING .
-- Install the impact member, refer to IMPACT MEMBER, REMOVING AND INSTALLING .
-- Connect the connection to the coupling, refer to Figure.
-- Fill with coolant, refer to Filling .
-- Check the ATF level, refer to ATF LEVEL, CHECKING for 0BK .