Balance Shaft, Removing And Installing: Installing

WARNING: This page is about a different car, the 2012 Audi Q5, 2011 Audi Q5, 2010 Audi Q5, and 2009 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Crankshaft Locking Pin T40069

Courtesy of AUDI OF AMERICA, LLC

Tightening specifications, refer to OVERVIEW - BALANCE SHAFT .
Crankshaft -1- secured in "TDC" using Crankshaft Locking Pin T40069.

Install in reverse order of removal. Note the following:

NOTE:

The balance weights can only be positioned one way on balance shaft.

-- Install the power take-off drive chain, refer to POWER TAKE-OFF DRIVE CHAIN, REMOVING AND INSTALLING .

-- Install the lower timing chain cover, refer to LOWER TIMING CHAIN COVER, REMOVING AND INSTALLING .

-- Install the belt pulley side sealing flange, refer to SEALING FLANGE, REMOVING AND INSTALLING, BELT PULLEY SIDE .