ATF Pipes, Removing And Installing, Vehicles With 2.0L TFSI Engine: Installing
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
- Tightening specifications, refer to OVERVIEW - ATF CIRCUIT .
NOTE:
Replace the O-rings.
-- Check the ATF level, refer to ATF LEVEL, CHECKING .
-- Install the noise insulations, refer to OVERVIEW - NOISE INSULATION .