Transmission, Transporting
WARNING: This page is about a different car, the 2015 Audi Q5, 2014 Audi Q5, and 2013 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Hook And Support Tool 3311 with Hook And Support Tool - Bolt 3311/1
- Shop Crane VAS6100
Procedure
- The transmission is removed.
CAUTION:
Transmission components could be damaged if they are not set down correctly.
- Do not set the transmission on the ATF pan.
If still attached, remove the selector lever cable bracket from the transmission, refer to OVERVIEW - SELECTOR LEVER CABLE .
WARNING:
An accident could result if the transmission is not secured correctly.
- Exchange the bolt on the Hook and Support Tool 3311 for a new, longer bolt Hook And Support Tool - Bolt 3311/1.
- Only this way can the transmission be secured.
-- Secure the transmission on the Hook And Support Tool 3311 (use new longer bolts Hook And Support Tool - Bolt 3311/1).
-- Lift and transport the transmission with the Shop Crane VAS6100.