Transmission Mount, Removing And Installing: Installing
WARNING: This page is about a different car, the 2015 Audi Q5, 2014 Audi Q5, and 2013 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
- Tightening specifications, refer to OVERVIEW - SUBFRAME MOUNT .
-- Mount the transmission support -3- on the transmission mount -5-.
-- Tighten the nut -4- hand-tight.
-- Tighten the lower stop -2- with the bolts -1-.
-- Tighten the nut -4-.
-- Install the transmission support and transmission mount, refer to TRANSMISSION SUPPORT WITH TRANSMISSION MOUNT, REMOVING AND INSTALLING .