Left Engine Mount, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

Tightening specifications, refer to OVERVIEW - SUBFRAME MOUNT .

NOTE:

Replace the bolts that were tightened with an additional turn.

-- Tighten the subframe, refer to OVERVIEW - SUBFRAME, CROSSBRACE, STABILIZER BAR, COUPLING ROD AND SUBFRAME SHIELD .

-- Install the A/C compressor, refer to A/C COMPRESSOR, REMOVING AND INSTALLING ON BRACKET .

-- Install the engine oil cooler, refer to ENGINE OIL COOLER, REMOVING AND INSTALLING .

-- Install the noise insulations, refer to OVERVIEW - NOISE INSULATION .