Overview - SUBFRAME Mount
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- 20 Nm
- Retaining Plate
- for the engine mount
- If the engine mount is faulty, replace the retaining plate
- Check the retaining plate on the opposite side; replace if necessary
- Bolt
- 40 Nm
- Engine Support
- Bolt
- 10 Nm
- Heat Shield
- Bolt
- 90 Nm +90°
- Replace
- Engine Mount
- Removing and installing:
- Left, refer to LEFT ENGINE MOUNT, REMOVING AND INSTALLING
- Right, refer to RIGHT ENGINE MOUNT, REMOVING AND INSTALLING
- Removing and installing:
- Subframe
- Bolt
- 55 Nm