LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 599 (3.2L - Ignition System - Engine Code(S): CALB (As Of 11.2008)) >> Ignition System >> Removal And Installation >> Camshaft Position Sensor >> Installing

Camshaft Position Sensor: Installing

WARNING: This page is about a different car, the 2012 Audi Q5, 2011 Audi Q5, 2010 Audi Q5, and 2009 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

-- Replace O-ring and lubricate it with clean engine oil.

-- Press camshaft position sensor in carefully by hand.

-- Tighten camshaft position sensor and connect electrical connector.

-- Further installation is in reverse order.

scientia non olet · About LEMON Manuals