LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Final Drive, Differential - Automatic Transmission 0B6 (Coupe)) >> 39 Final Drive, Differential >> Removal And Installation >> Left Flange Shaft >> Removing

Left Flange Shaft: Removing

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2012 Audi S5, 2011 Audi S5, 2010 Audi S5, 2010 Audi A5, and 2009 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

-- Tilt the transmission back on the engine/transmission holder so the transmission fluid does not drain out.

-- Remove the bolts -arrows- from the flange shaft mounting bracket.

Fig 1: Identifying Bolts -Arrows- & Flange Shaft Mounting Bracket
GWWA30-10170Courtesy of AUDI OF AMERICA, LLC

-- Remove the left flange shaft -2- from the transmission -arrow A-.

Fig 2: Identifying Left Flange Shaft
GWWA30-10171Courtesy of AUDI OF AMERICA, LLC
NOTE:

Ignore -1- and -arrow 3, B-.

-- Remove the torque converter. Refer to TORQUE CONVERTER .