Transmission, Securing In Engine/Transmission Holder
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2012 Audi S5, 2011 Audi S5, 2010 Audi S5, 2010 Audi A5, and 2009 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Holding Plate VW 309
- Engine and Transmission Holder VAS 6095
Procedure
- Transmission secured with the shop crane VAS 6100. Refer to TRANSMISSION, TRANSPORTING .
-- Install the VW 309 on the hook and support tool 3311.
-- Place the transmission into the VAS 6095 using the VAS 6100.
NOTE:
The vents for the transmission housing and final drive must be closed before turning a filled transmission with oil pan upward on the engine and transmission holder.